The Dovpo E-LVT 2.0 mod is capable of producing 30W of power and can now fire sub ohm coils as low as 0.3ohm. It is water resistant, Shock - Dust Proof and Crush Resistant. And It’s powered by an 18650 battery and you can also use it as a portable power bank to charge other electronic devices. E-LVT also has some new updates including an adjustable connecting pin (uses a small phillips) an over limit vaping alarm, and a hidden exhaust hole, to ensure extra safety if battery failure occurs. There are six colors you can choose.
1. Using a zinc alloy with a silicone rubber coating process for the first time in the e-cigs industry.
2.Dust-proof,water resistant,IPX1(protection rating)
4.Power bank for digital devices.
6. Replaceable 18650 battery(Not Included)
7.Display the battery voltage
8.Display the output wattage
9.Variable wattage from 7w to 30w
10.Compatible with 510 threaded devices
11.Removable connector,so you can easily remove the atomizer.
12.Stati ccurrent switch,guarantees no loss of power
13.Function lock(To avoid accidentally changing the settings)
14.Over limit vaping alarm.
16.Battery polarity protection.
17.Battery LED status Indicator
18.Overcharge protection/over-discharge protection
19.Hidden exhaust hole,to ensure the safety of product if battery fail ure occurs.
20.Cool appearance,fits perfectly in your hand!
21.Equipped with professional Allen key,making battery replacement easy.
1.Remove the battery cover using the supplied allen wrench. Insert an 18650 battery into the battery box. The E-LVT2.0 will power on, Display wills how the number 888. The LED' s will flash red, yellow, then green. The E-LVT2.0 will then power off . Replace the battery cover and the unit is ready for use
2.Press the smoking button 3 times within two seconds continuously. LED' s will flash red,yellow then green and the digital display will show (ON) yourE-LVT2.0 is now ready to vape. After the E-LVT2.0 is on the led indicator lights wills how the battery capacity while pressing the smoking button. (Green = best, Yellow = caution, Red = ti me to charge the battery The maximum puff time is 10 seconds, after 10 seconds the LED will blink five times and the atomizer will stop working
3.When turned on, the display will show "LOC" when the button "+" or "-" are pressed, To unlock press and hold the "+" and "-" at the same time for 5 seconds , then the function of "+" and "-" will became usable. To lock the function buttons, just press and hold both "+" and "-" buttons for 5 seconds again, then the button "+" and "-" will became unusable.
5.The display will show the voltage of battery when pressing"+"and smoking button at the same time for 2 seconds continuously
6. When pressing "+" and "-" for 2 seconds simultaneously, the display will show the resistance of the atomizer, or show "non" when no atomizer is on the mod.
7.To turn on the flashlight press the"-" and smoking button at the same time for two seconds continuously. To turn off the flashlight press the two buttons for two seconds continuously again.
8.To turn off your E-LVT2.0 press "smoking key" 3 times within 2 seconds the display will show "OFF
9. Your E-LVT2.0 can be charged with the USB port on your computer through the mini USB cable. The LED indicator of your E-LVT2.0 will turn on while charging,and turn off when complete.
10.Turning the switch to "ON", the display will show "---", then you can charge your digital product through the USB port, Please note charging will n ot work if your battery is low on power
11.When the resistance of the atomizer is too low or the atomizer has a short circuit, the display will show "0.0R" When the smoking button is pressed, the indicator will glow red and there will be no output.
13.Recommended power range corresponding to the resistance:
|Product name||Dovpo E-LVT 2.0 Mod|
|Battery capacity||18650 batteries|
1 x eLVT body