iStick 30W is upgraded on iSitck through expanding the range of output voltage and wattage. Under the support of 2200mAh battery capacity, it will give you great performance between 2V-8V or 5W-30W. Newly introduced spring connector, wear-resistant stainless steel thread, and streamlined design on top make iStick 30W more suitable for atomizers. More ever, the added button lock functionality protects the buttons and prolong their service life. iSitck 30W can also support sub ohm coil. It is just the one you deserve to own. This iStick 30W can support sub ohm resistance atomizers.
Switch the VV/VW mode: Press the square button for three times to switch the VV/VW mode when the battery is turned on. In VV mode, you can adjust output voltage between 2.0V-8.0V. In VW mode, you can adjust output wattage between 5W-30W.
Adjust the voltage/wattage: Press the up-and-down arrow buttons to increase or decrease the voltage/wattage. Keep pressing the up/down arrow button, voltage/wattage will increase or decrease slowly at first, then they will increase/decrease at a constant high speed. The number will stop increasing/decreasing when you loosen the up/down arrow button.
Lock and Unlock: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is on, then they will be locked and the screen will reflect “Lock”. Still keep pressing simultaneously for 2 seconds to unlock them and the screen will reflect “Unlock”. Through these operations, you can protect the buttons from unintentional presses and prolong their service life.
Switch the display mode: Keep pressing up-arrow button and down-arrow button simultaneously for 2 seconds when the battery is off, the screen display will rotate 180 degrees. You can view the screen from two kinds of angle through this operation.
How to charge: iStick 30W is charged through the Micro USB port at the bottom of battery.
It will take 2.5 hours to fully charge the battery via 1A wall adaptor.
The battery level indicator on the OLED screen will keep flashing during charging. When fully charged, the indicator will stop flashing and keep shining for 15 seconds then go out.
Over 10s Protection: If you keep pressing the button for over 10 seconds, the output will shut off and the OLED screen will reflect “Over 10s”.
Atomizer Short-circuit Protection: When atomizer short-circuit occurs, the OLED screen will reflect “Atomizer Short”.
Low-voltage Protection: When the voltage of battery is below 3.3V, the OLED screen will reflect “Lock”.
Unlock the Low-voltage Protection: When the voltage of battery is above 3.7V, the low-voltage protection will be unlocked.
Low power Alert: If the power of battery is lower than 10%, the power symbol on the screen will flash.
Size: 23.0mm * 32.5 mm * 77.0mm
Color: black, sliver, red, blue
Rated output voltage: 2.0V-8.0V
Rated resistance range: 0.5Ω-5Ω
Thread Type: 510 Thread
1.Perfect small and pocket-sized box mod.
2. Multiple protection functions such as atomizer short circuit protection, over 10s protection, and low-voltage protection.
3. OLED screen that can display the battery condition, resistance, wattage, and voltage very clearly and accurately.
4. 2200mAh large capacity lets you enjoy vaping all day.
5. High Stability-the iStick delivers high output wattage even when it has low power
6. New adjustable voltage/wattage sytem you can fine tune your device in three increments manners by pressing the button for seconds
7. Passthrough vaping while charging with a USB socket on the device.
8. Electronics in the device are solid quality and can show the meters accuratly.
|Product name||iStick 30W VV/VW Mod with wall adaptor and usb cable|
|Thread Type||510 thread|
|Color||silver, blue, black, red|
1x iStick 30w battery
1xwall adaptor with usb cable
You may also be interested in the following product(s)
Customer ReviewsSort by:
1 Item(s)per page
Value Quality ServiceFantastic Mini Mod
This tiny Mini Mod is of great quality. The reading are perfect and spot on with ohm reading and therefore you also get the right watt as you set it after the ohm. i like the function where you can lock the set ohm, so that you dont move your settings by accident while using it!
Great product to a great price.