The Kanthal Wire from Youde Technology is wrapped well and can be wound with a very low resistance up to 0.8ohm. In order to supply the finished spiral with electricity it should be screwed into the respective poles of Selbstwickler base and laced with enough cotton. The Kanthal Wire is pre-build , the spirial can be put into use when you get it. Before put into use please ensure the wire was absorbed enough eliquids. Futhermore, please use proper battery with the corresponding function to respective wire with different resistance.
By twisting the wire, the resistance of the coil is reduced but still maintain the high coverage on the wick. This is all about increasing the surface area to give off more vapour. High quality wire, perfect wire for rebuilding atomizers!
The flat ribbon shape wire can enlarge the surface contatcs for the coil and it will make it easier to rebuild. Use this type wire will also reduce the hot spots. This wire is twisted with 3 wire.
Package content:1 x Youde UD Flat Ribbon Wire 28ga with 0.5*0.1mm Triple Twisted Wire 5m
1. High safety design
2. Faster heating
3. Easy to use