Product Description:
Wismec EXO Skeleton ES300 mod comes with a top 0.66inch OLED display and user-friendly interface. It is powered by two or three replaceable 18650 cells and support maximum output up to 200W or 300W for your preference. The application of LED light makes your mod much charming and fashionable, bringing much visual enjoyment. The innovative design features the polygonal appearance and transparent body, allowing you view the internal structure clearly. By unscrewing the screws only, you can replace a different case for ES300 quickly and easily. The flip-open cover with ventilation holes is designed for easier cells replacement and better heat dissipation. Coming with the upgradeable firmware, you can choose the LED light on/off to your preference.
Parameter:
Mod Size |
50.7mm*49.7mm*86.0mm |
Battery Type |
2 or 3* high-rate 18650 cell (not included) |
Output Wattage |
1-200W(2 cells)/ 1-300W(3 cells) |
Output Mode |
VW/TC-Ni/TC-Ti/TC-SS/TCR Mode |
Resistance Range |
0.05-1.5ohm for TC modes |
Temperature Range | 100-315°C/200-600°F (TC modes) |
Thread Type |
510 spring loaded thread |
Max charging current | 2A |
Max output current | 50A |
Output voltage range | 0.5-9V |
Color |
Red, Silver, Blue |
Package content:
1* ES300 Battery (no cells)1 * QC USB Cable
1 * User Manual
1 * Warning Card
Detailed Introduction:
Features:
1. 200/300W powerful output for your preference
2. Powered by two or three cells
3. Creative LED Light for Visual Enjoyment
4. Innovative Design with Transparent Frame
5. Replaceable Decorative Cases in Attractive Colors
6. Dual Circuit Protection & Reverse Polarity Protection
7. Flip-open Battery Cover for Easy Exchange
8. Upgradeable Firmware function