Product Description:
Pioneer4You IPV D3 80W Mod is developed on the original D2 with improved features. The IPV D3 is powered by YiHi SX150H chip and can support Ni and Ti types TC coils. The D3 improved the main complaints on D2-the paint and changed the battery cover to magnetic with no need to use screws, which will make the battery recharging and replacing much more convenient.
Parameter:
Size | 39.2mm*77.8mm*24.1mm |
Battery type |
18650 |
Output range |
7W-80W |
Resistance |
0.05ohm-0.5ohm(TC Mode) 0.15ohm-3.0ohm(VW Mode) |
Input Voltage | 3.2V-4.5V |
Output Voltage | 1.0V-7.0V |
Temp. limit Centigrade | 100°C-300°C/212°F-572°F |
Input Current | 1.3A-35.0A |
Output Current | 1.0A-30.0A |
Color |
Black, Silver, White, Blue |
Package content:
1 x Pioneer4You IPV D3 Mod(battery not included)
1 x USB cable
1 x User manual
Detailed Introduction:
Features:
1. Convenient magnetic battery cover
2. Powered by YiHi SX150H chip
3. 80w higher output wattage
4. Housing single 18650 battery
5. Supports TC coils made by Nickel and Titanium
6. High safety design: low voltage/resistance protection, high input voltage warning, short circuit protection, reverse battery protection, overheating protection
7. Improved paint from the original iPV D2
2. Powered by YiHi SX150H chip
3. 80w higher output wattage
4. Housing single 18650 battery
5. Supports TC coils made by Nickel and Titanium
6. High safety design: low voltage/resistance protection, high input voltage warning, short circuit protection, reverse battery protection, overheating protection
7. Improved paint from the original iPV D2