Attention:
Shipping restriction: We can not sell any Smok products to Denmark, Russia, Austrlia, Poland, Netherland, Czech Republic, Slovakia, Paraguay, Ukraine due to exclusive distributor of Smok. We will remove Smok products from orders directly and ship rest items out! The difference will be refunded within 2-3 business days. Your kind understanding is greatly appreciated.
Parameter:
Size | 63mm*24.5mm |
Material | Glass&Stainless Steel |
Capacity | 5ml |
Weight | 80g |
Thread Type | 510 |
Color | silver, black |
Package content:
1* TF-RDTA Tank(24.5mm)1* TF-RDTA S2 Deck(pre-installed)
1* Allen Key Screwdriver
1* Replacement Glass Tube
1* Smok Vape Band(silver version not included)
1* User Manual
Spare Parts
1. 5ml big capacity with Patented swivel-cap Design
2. 0.2ohm dual clapton wires available
3. Side airflow slots direct to coil design
4. Deck&Base two-in-one structure,more juice capacity
5. Hidden sealing ring
6. Innovative juice flow control system
7. No-leaking design
8. 16mm big replaceable S2 deck easy to build
9. Double-layered drip tip
How to build the S2 deck:
1 .Before starting make sure your hands are clean.
2.Taking the TF-RDTA S2 deck apart.
3.Installing the pre-wrapped coil. Insert one end of your coil into the left-side holes, and the other end into the right-side holes.
4.Positioning and cutting the exceeding ends of wire off. Make sure the coil is fixed and lined up with the air hole, and also make sure the coil is NOT touching the deck. Then cut the exceeding ends of wire off.
5.Cutting a strip of cotton and make sure it’s just larger than the coil you built.
6.Inserting the cotton, and placing it in the middle.
7.Then guide the ends of cotton wick through the holes below
8.Cutting the ends and make sure it’s not too short and not too long.
9.Wet the coil with your e-liquid and adjust the wick.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.