Youde UD Kanthal Wire 10m 26ga 0.4mm Kanthal A1 Wire with Aluminum Foil and Vacuum Blister

Product Description:

The Kanthal Wire from Youde Technology is wrapped well and can be wound with a very low resistance up to 0.8ohm. In order to supply the finished spiral with electricity it should be screwed into the respective poles of Selbstwickler base and laced with enough cotton. The Kanthal Wire is pre-build , the spirial can be put into use when you get it. Before put into use please ensure the wire was absorbed enough eliquids. Futhermore, please use proper battery with the corresponding function to respective wire with different resistance.

Parameter:

Diameter	26ga: 0.4mm
Length	10m
Material	Nickel/Kanthal A1/Nichrome/Aluminum Foil
Brand	Youde

Package content:

1 x 26GA Kanthal Wire 10m

Detailed Introduction:
Features:

1. Pre-build wire easy for immediate use
2. Well wrapped with high quality material
3. High safety design not easy to cause short-circuit
4. Faster heating

Tips:

If the resistance are below 1.0ohm, please use it with high current batteries. We usually recommend 21oomah VTC-4 batteries from Sony.