Product Description:
The Kanthal Wire from Youde Technology is wrapped well and can be wound with a very low resistance up to 0.8ohm. In order to supply the finished spiral with electricity it should be screwed into the respective poles of Selbstwickler base and laced with enough cotton. The Kanthal Wire is pre-build , the spirial can be put into use when you get it. Before put into use please ensure the wire was absorbed enough eliquids. Futhermore, please use proper battery with the corresponding function to respective wire with different resistance.
The Nichrome Wire from Yude Technology is very versatile. When done correctly you can use Nichrome to build on mech mods without temperature control and temperature control devices as well.
Parameter:
Diameter | 24ga: 0.5mm |
Length | 10m/roll |
Material | Nichrome |
Brand | Youde |
Package content:
1 x24GA Nichrome Yode Wire 10mDetailed Introduction:
Features:
1. Pre-build wire easy for immediate use
2. Well wrapped with high quality material
3. High safety design not easy to cause short-circuit
4. Faster heating
2. Well wrapped with high quality material
3. High safety design not easy to cause short-circuit
4. Faster heating
Tips:
If the resistance are below 1.0ohm, please use it with high current batteries. We usually recommend 21oomah VTC-4 batteries from Sony.
Before put the rebuilable coil into use, please test it with a resistance tester.
These items destroy electronic devices if faulty. This is a known issue.